Guia de implementação do Core do Brasil: Release 1 - BR Realm | STU1
1.0.0 - STU1 Brazil flag

This page is part of the Core do Brasil (v1.0.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: BRCoreDiagnosticReport - Descrições detalhadas

Active as of 2025-02-27

Definitions for the br-core-diagnosticreport resource profile.

Guidance on how to interpret the contents of this table can be found here

0. DiagnosticReport
2. DiagnosticReport.identifier
Definition

Identificadores externos para este recurso

ShortIdentificadores externos para este recurso
NoteThis is a business identifier, not a resource identifier (see discussion)
4. DiagnosticReport.basedOn
Definition

O que foi solicitado

ShortO que foi solicitado
TypeReference(BRCoreCarePlan, ImmunizationRecommendation, br-core-medicationrequest, NutritionOrder, BRCoreServiceRequest)
6. DiagnosticReport.status
Definition

registered | partial | preliminary | final +

ShortO status do relatório de diagnóstico.
8. DiagnosticReport.category
Definition

Categoria do serviço

ShortCategoria do serviço
BindingThe codes SHALL be taken from Servico Especializado
(required to https://terminologia.saude.gov.br/fhir/ValueSet/BRServicoEspecializado)
10. DiagnosticReport.code
Definition

Nome/Código para este relatório de diagnóstico

ShortNome/Código para este relatório de diagnóstico
12. DiagnosticReport.subject
Definition

O indivíduo do relatório - geralmente, mas nem sempre, o paciente

ShortO indivíduo do relatório - geralmente, mas nem sempre, o paciente
TypeReference(BRCorePatient)
14. DiagnosticReport.encounter
Definition

Evento de assistência médica quando o teste foi solicitado

ShortEvento de assistência médica quando o teste foi solicitado
TypeReference(br-core-encounter)
16. DiagnosticReport.effective[x]
Definition

Tempo/período de tempo clinicamente relevante para o relatório

ShortTempo/período de tempo clinicamente relevante para o relatório
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
18. DiagnosticReport.issued
Definition

Data e hora em que esta versão foi feita

ShortData e hora em que esta versão foi feita
20. DiagnosticReport.performer
Definition

Serviço de Diagnóstico Responsável

ShortServiço de Diagnóstico Responsável
TypeReference(BRCorePractitioner, BRCorePractitionerRole, BRCoreOrganization, CareTeam)
22. DiagnosticReport.resultsInterpreter
Definition

Intérprete de resultado primário

ShortIntérprete de resultado primário
TypeReference(BRCorePractitioner, BRCorePractitionerRole, BRCoreOrganization, CareTeam)
24. DiagnosticReport.specimen
Definition

Amostras nas quais este relatório se baseia

ShortAmostras nas quais este relatório se baseia
TypeReference(BRCoreSpecimen)
26. DiagnosticReport.result
Definition

Observations

TypeReference(BRCoreObservation)
28. DiagnosticReport.imagingStudy
Definition

Referência a todos os detalhes da imagem associada ao relatório de diagnóstico

ShortReferência a todos os detalhes da imagem associada ao relatório de diagnóstico
30. DiagnosticReport.media
Definition

Imagens principais associadas a este relatório

ShortImagens principais associadas a este relatório
32. DiagnosticReport.media.comment
Definition

Comentário sobre a imagem (por exemplo, explicação)

ShortComentário sobre a imagem (por exemplo, explicação)
34. DiagnosticReport.media.link
Definition

Referência à fonte da imagem

ShortReferência à fonte da imagem
36. DiagnosticReport.conclusion
Definition

Conclusão clínica (interpretação) dos resultados dos testes

ShortConclusão clínica (interpretação) dos resultados dos testes
38. DiagnosticReport.conclusionCode
Definition

Códigos para a conclusão clínica dos resultados dos testes

ShortCódigos para a conclusão clínica dos resultados dos testes
40. DiagnosticReport.presentedForm
Definition

Relatório completo conforme emitido

ShortRelatório completo conforme emitido

Guidance on how to interpret the contents of this table can be found here

0. DiagnosticReport
Definition

The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports.

ShortA Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports
Comments

This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesReport, Test, Result, Results, Labs, Laboratory
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. DiagnosticReport.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. DiagnosticReport.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. DiagnosticReport.identifier
Definition

Identificadores externos para este recurso


Identifiers assigned to this report by the performer or other systems.

ShortIdentificadores externos para este recursoBusiness identifier for report
Comments

Usually assigned by the Information System of the diagnostic service provider (filler id).

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

Need to know what identifier to use when making queries about this report from the source laboratory, and for linking to the report outside FHIR context.

Alternate NamesReportID, Filler ID, Placer ID
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. DiagnosticReport.basedOn
Definition

O que foi solicitado


Details concerning a service requested.

ShortO que foi solicitadoWhat was requested
Comments

Note: Usually there is one test request for each result, however in some circumstances multiple test requests may be represented using a single test result resource. Note that there are also cases where one request leads to multiple reports.

Control0..*
TypeReference(BRCoreCarePlan, ImmunizationRecommendation, br-core-medicationrequest, NutritionOrder, BRCoreServiceRequest, CarePlan, MedicationRequest, ServiceRequest)
Is Modifierfalse
Summaryfalse
Requirements

This allows tracing of authorization for the report and tracking whether proposals/recommendations were acted upon.

Alternate NamesRequest
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. DiagnosticReport.status
Definition

registered | partial | preliminary | final +


The status of the diagnostic report.

ShortO status do relatório de diagnóstico.registered | partial | preliminary | final +
Control1..1
BindingThe codes SHALL be taken from DiagnosticReportStatushttp://hl7.org/fhir/ValueSet/diagnostic-report-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/diagnostic-report-status|4.0.1)

The status of the diagnostic report.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. DiagnosticReport.category
Definition

Categoria do serviço


A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes.

ShortCategoria do serviçoService category
Comments

Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code.

Control0..*
BindingThe codes SHALL be taken from For example codes, see Servico Especializadohttp://hl7.org/fhir/ValueSet/diagnostic-service-sections
(required to https://terminologia.saude.gov.br/fhir/ValueSet/BRServicoEspecializado)
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Alternate NamesDepartment, Sub-department, Service, Discipline
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. DiagnosticReport.code
Definition

Nome/Código para este relatório de diagnóstico


A code or name that describes this diagnostic report.

ShortNome/Código para este relatório de diagnósticoName/Code for this diagnostic report
Control1..1
BindingThe codes SHOULD be taken from LOINCDiagnosticReportCodeshttp://hl7.org/fhir/ValueSet/report-codes
(preferred to http://hl7.org/fhir/ValueSet/report-codes)

Codes that describe Diagnostic Reports.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Alternate NamesType
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. DiagnosticReport.subject
Definition

O indivíduo do relatório - geralmente, mas nem sempre, o paciente


The subject of the report. Usually, but not always, this is a patient. However, diagnostic services also perform analyses on specimens collected from a variety of other sources.

ShortO indivíduo do relatório - geralmente, mas nem sempre, o pacienteThe subject of the report - usually, but not always, the patient
Control0..1
TypeReference(BRCorePatient, Patient, Group, Device, Location)
Is Modifierfalse
Summarytrue
Requirements

SHALL know the subject context.

Alternate NamesPatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. DiagnosticReport.encounter
Definition

Evento de assistência médica quando o teste foi solicitado


The healthcare event (e.g. a patient and healthcare provider interaction) which this DiagnosticReport is about.

ShortEvento de assistência médica quando o teste foi solicitadoHealth care event when test ordered
Comments

This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

Control0..1
TypeReference(br-core-encounter, Encounter)
Is Modifierfalse
Summarytrue
Requirements

Links the request to the Encounter context.

Alternate NamesContext
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. DiagnosticReport.effective[x]
Definition

Tempo/período de tempo clinicamente relevante para o relatório


The time or time-period the observed values are related to. When the subject of the report is a patient, this is usually either the time of the procedure or of specimen collection(s), but very often the source of the date/time is not known, only the date/time itself.

ShortTempo/período de tempo clinicamente relevante para o relatórioClinically relevant time/time-period for report
Comments

If the diagnostic procedure was performed on the patient, this is the time it was performed. If there are specimens, the diagnostically relevant time can be derived from the specimen collection times, but the specimen information is not always available, and the exact relationship between the specimens and the diagnostically relevant time is not always automatic.

Control0..1
TypeChoice of: dateTime, Period
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know where in the patient history to file/present this report.

Alternate NamesObservation time, Effective Time, Occurrence
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. DiagnosticReport.issued
Definition

Data e hora em que esta versão foi feita


The date and time that this version of the report was made available to providers, typically after the report was reviewed and verified.

ShortData e hora em que esta versão foi feitaDateTime this version was made
Comments

May be different from the update time of the resource itself, because that is the status of the record (potentially a secondary copy), not the actual release time of the report.

Control0..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Clinicians need to be able to check the date that the report was released.

Alternate NamesDate published, Date Issued, Date Verified
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. DiagnosticReport.performer
Definition

Serviço de Diagnóstico Responsável


The diagnostic service that is responsible for issuing the report.

ShortServiço de Diagnóstico ResponsávelResponsible Diagnostic Service
Comments

This is not necessarily the source of the atomic data items or the entity that interpreted the results. It is the entity that takes responsibility for the clinical report.

Control0..*
TypeReference(BRCorePractitioner, BRCorePractitionerRole, BRCoreOrganization, CareTeam, Practitioner, PractitionerRole, Organization)
Is Modifierfalse
Summarytrue
Requirements

Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis.

Alternate NamesLaboratory, Service, Practitioner, Department, Company, Authorized by, Director
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. DiagnosticReport.resultsInterpreter
Definition

Intérprete de resultado primário


The practitioner or organization that is responsible for the report's conclusions and interpretations.

ShortIntérprete de resultado primárioPrimary result interpreter
Comments

Might not be the same entity that takes responsibility for the clinical report.

Control0..*
TypeReference(BRCorePractitioner, BRCorePractitionerRole, BRCoreOrganization, CareTeam, Practitioner, PractitionerRole, Organization)
Is Modifierfalse
Summarytrue
Requirements

Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis.

Alternate NamesAnalyzed by, Reported by
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. DiagnosticReport.specimen
Definition

Amostras nas quais este relatório se baseia


Details about the specimens on which this diagnostic report is based.

ShortAmostras nas quais este relatório se baseiaSpecimens this report is based on
Comments

If the specimen is sufficiently specified with a code in the test result name, then this additional data may be redundant. If there are multiple specimens, these may be represented per observation or group.

Control0..*
TypeReference(BRCoreSpecimen, Specimen)
Is Modifierfalse
Summaryfalse
Requirements

Need to be able to report information about the collected specimens on which the report is based.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. DiagnosticReport.result
Definition

Observations


Observations that are part of this diagnostic report.

ShortObservations
Comments

Observations can contain observations.

Control0..*
TypeReference(BRCoreObservation, Observation)
Is Modifierfalse
Summaryfalse
Requirements

Need to support individual results, or groups of results, where the result grouping is arbitrary, but meaningful.

Alternate NamesData, Atomic Value, Result, Atomic result, Data, Test, Analyte, Battery, Organizer
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. DiagnosticReport.imagingStudy
Definition

Referência a todos os detalhes da imagem associada ao relatório de diagnóstico


One or more links to full details of any imaging performed during the diagnostic investigation. Typically, this is imaging performed by DICOM enabled modalities, but this is not required. A fully enabled PACS viewer can use this information to provide views of the source images.

ShortReferência a todos os detalhes da imagem associada ao relatório de diagnósticoReference to full details of imaging associated with the diagnostic report
Comments

ImagingStudy and the image element are somewhat overlapping - typically, the list of image references in the image element will also be found in one of the imaging study resources. However, each caters to different types of displays for different types of purposes. Neither, either, or both may be provided.

Control0..*
TypeReference(ImagingStudy)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. DiagnosticReport.media
Definition

Imagens principais associadas a este relatório


A list of key images associated with this report. The images are generally created during the diagnostic process, and may be directly of the patient, or of treated specimens (i.e. slides of interest).

ShortImagens principais associadas a este relatórioKey images associated with this report
Control0..*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Requirements

Many diagnostic services include images in the report as part of their service.

Alternate NamesDICOM, Slides, Scans
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. DiagnosticReport.media.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. DiagnosticReport.media.comment
Definition

Comentário sobre a imagem (por exemplo, explicação)


A comment about the image. Typically, this is used to provide an explanation for why the image is included, or to draw the viewer's attention to important features.

ShortComentário sobre a imagem (por exemplo, explicação)Comment about the image (e.g. explanation)
Comments

The comment should be displayed with the image. It would be common for the report to include additional discussion of the image contents in other sections such as the conclusion.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

The provider of the report should make a comment about each image included in the report.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. DiagnosticReport.media.link
Definition

Referência à fonte da imagem


Reference to the image source.

ShortReferência à fonte da imagemReference to the image source
Control1..1
TypeReference(Media)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. DiagnosticReport.conclusion
Definition

Conclusão clínica (interpretação) dos resultados dos testes


Concise and clinically contextualized summary conclusion (interpretation/impression) of the diagnostic report.

ShortConclusão clínica (interpretação) dos resultados dos testesClinical conclusion (interpretation) of test results
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Need to be able to provide a conclusion that is not lost among the basic result data.

Alternate NamesReport
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. DiagnosticReport.conclusionCode
Definition

Códigos para a conclusão clínica dos resultados dos testes


One or more codes that represent the summary conclusion (interpretation/impression) of the diagnostic report.

ShortCódigos para a conclusão clínica dos resultados dos testesCodes for the clinical conclusion of test results
Control0..*
BindingFor example codes, see SNOMEDCTClinicalFindingshttp://hl7.org/fhir/ValueSet/clinical-findings
(example to http://hl7.org/fhir/ValueSet/clinical-findings)

Diagnosis codes provided as adjuncts to the report.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. DiagnosticReport.presentedForm
Definition

Relatório completo conforme emitido


Rich text representation of the entire result as issued by the diagnostic service. Multiple formats are allowed but they SHALL be semantically equivalent.

ShortRelatório completo conforme emitidoEntire report as issued
Comments

"application/pdf" is recommended as the most reliable and interoperable in this context.

Control0..*
TypeAttachment
Is Modifierfalse
Summaryfalse
Requirements

Gives laboratory the ability to provide its own fully formatted report for clinical fidelity.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. DiagnosticReport
Definition

The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports.

ShortA Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports
Comments

This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesReport, Test, Result, Results, Labs, Laboratory
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. DiagnosticReport.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. DiagnosticReport.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. DiagnosticReport.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. DiagnosticReport.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. DiagnosticReport.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. DiagnosticReport.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. DiagnosticReport.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. DiagnosticReport.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. DiagnosticReport.identifier
Definition

Identificadores externos para este recurso

ShortIdentificadores externos para este recurso
Comments

Usually assigned by the Information System of the diagnostic service provider (filler id).

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

Need to know what identifier to use when making queries about this report from the source laboratory, and for linking to the report outside FHIR context.

Alternate NamesReportID, Filler ID, Placer ID
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. DiagnosticReport.basedOn
Definition

O que foi solicitado

ShortO que foi solicitado
Comments

Note: Usually there is one test request for each result, however in some circumstances multiple test requests may be represented using a single test result resource. Note that there are also cases where one request leads to multiple reports.

Control0..*
TypeReference(BRCoreCarePlan, ImmunizationRecommendation, br-core-medicationrequest, NutritionOrder, BRCoreServiceRequest)
Is Modifierfalse
Summaryfalse
Requirements

This allows tracing of authorization for the report and tracking whether proposals/recommendations were acted upon.

Alternate NamesRequest
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. DiagnosticReport.status
Definition

registered | partial | preliminary | final +

ShortO status do relatório de diagnóstico.
Control1..1
BindingThe codes SHALL be taken from DiagnosticReportStatus
(required to http://hl7.org/fhir/ValueSet/diagnostic-report-status|4.0.1)

The status of the diagnostic report.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. DiagnosticReport.category
Definition

Categoria do serviço

ShortCategoria do serviço
Comments

Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code.

Control0..*
BindingThe codes SHALL be taken from Servico Especializado
(required to https://terminologia.saude.gov.br/fhir/ValueSet/BRServicoEspecializado)
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Alternate NamesDepartment, Sub-department, Service, Discipline
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. DiagnosticReport.code
Definition

Nome/Código para este relatório de diagnóstico

ShortNome/Código para este relatório de diagnóstico
Control1..1
BindingThe codes SHOULD be taken from LOINCDiagnosticReportCodes
(preferred to http://hl7.org/fhir/ValueSet/report-codes)

Codes that describe Diagnostic Reports.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Alternate NamesType
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. DiagnosticReport.subject
Definition

O indivíduo do relatório - geralmente, mas nem sempre, o paciente

ShortO indivíduo do relatório - geralmente, mas nem sempre, o paciente
Control0..1
TypeReference(BRCorePatient)
Is Modifierfalse
Summarytrue
Requirements

SHALL know the subject context.

Alternate NamesPatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. DiagnosticReport.encounter
Definition

Evento de assistência médica quando o teste foi solicitado

ShortEvento de assistência médica quando o teste foi solicitado
Comments

This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

Control0..1
TypeReference(br-core-encounter)
Is Modifierfalse
Summarytrue
Requirements

Links the request to the Encounter context.

Alternate NamesContext
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. DiagnosticReport.effective[x]
Definition

Tempo/período de tempo clinicamente relevante para o relatório

ShortTempo/período de tempo clinicamente relevante para o relatório
Comments

If the diagnostic procedure was performed on the patient, this is the time it was performed. If there are specimens, the diagnostically relevant time can be derived from the specimen collection times, but the specimen information is not always available, and the exact relationship between the specimens and the diagnostically relevant time is not always automatic.

Control0..1
TypeChoice of: dateTime, Period
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to know where in the patient history to file/present this report.

Alternate NamesObservation time, Effective Time, Occurrence
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. DiagnosticReport.issued
Definition

Data e hora em que esta versão foi feita

ShortData e hora em que esta versão foi feita
Comments

May be different from the update time of the resource itself, because that is the status of the record (potentially a secondary copy), not the actual release time of the report.

Control0..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Clinicians need to be able to check the date that the report was released.

Alternate NamesDate published, Date Issued, Date Verified
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. DiagnosticReport.performer
Definition

Serviço de Diagnóstico Responsável

ShortServiço de Diagnóstico Responsável
Comments

This is not necessarily the source of the atomic data items or the entity that interpreted the results. It is the entity that takes responsibility for the clinical report.

Control0..*
TypeReference(BRCorePractitioner, BRCorePractitionerRole, BRCoreOrganization, CareTeam)
Is Modifierfalse
Summarytrue
Requirements

Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis.

Alternate NamesLaboratory, Service, Practitioner, Department, Company, Authorized by, Director
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. DiagnosticReport.resultsInterpreter
Definition

Intérprete de resultado primário

ShortIntérprete de resultado primário
Comments

Might not be the same entity that takes responsibility for the clinical report.

Control0..*
TypeReference(BRCorePractitioner, BRCorePractitionerRole, BRCoreOrganization, CareTeam)
Is Modifierfalse
Summarytrue
Requirements

Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis.

Alternate NamesAnalyzed by, Reported by
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. DiagnosticReport.specimen
Definition

Amostras nas quais este relatório se baseia

ShortAmostras nas quais este relatório se baseia
Comments

If the specimen is sufficiently specified with a code in the test result name, then this additional data may be redundant. If there are multiple specimens, these may be represented per observation or group.

Control0..*
TypeReference(BRCoreSpecimen)
Is Modifierfalse
Summaryfalse
Requirements

Need to be able to report information about the collected specimens on which the report is based.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. DiagnosticReport.result
Definition

Observations

ShortObservations
Comments

Observations can contain observations.

Control0..*
TypeReference(BRCoreObservation)
Is Modifierfalse
Summaryfalse
Requirements

Need to support individual results, or groups of results, where the result grouping is arbitrary, but meaningful.

Alternate NamesData, Atomic Value, Result, Atomic result, Data, Test, Analyte, Battery, Organizer
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. DiagnosticReport.imagingStudy
Definition

Referência a todos os detalhes da imagem associada ao relatório de diagnóstico

ShortReferência a todos os detalhes da imagem associada ao relatório de diagnóstico
Comments

ImagingStudy and the image element are somewhat overlapping - typically, the list of image references in the image element will also be found in one of the imaging study resources. However, each caters to different types of displays for different types of purposes. Neither, either, or both may be provided.

Control0..*
TypeReference(ImagingStudy)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. DiagnosticReport.media
Definition

Imagens principais associadas a este relatório

ShortImagens principais associadas a este relatório
Control0..*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Requirements

Many diagnostic services include images in the report as part of their service.

Alternate NamesDICOM, Slides, Scans
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. DiagnosticReport.media.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
50. DiagnosticReport.media.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
52. DiagnosticReport.media.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. DiagnosticReport.media.comment
Definition

Comentário sobre a imagem (por exemplo, explicação)

ShortComentário sobre a imagem (por exemplo, explicação)
Comments

The comment should be displayed with the image. It would be common for the report to include additional discussion of the image contents in other sections such as the conclusion.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

The provider of the report should make a comment about each image included in the report.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. DiagnosticReport.media.link
Definition

Referência à fonte da imagem

ShortReferência à fonte da imagem
Control1..1
TypeReference(Media)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. DiagnosticReport.conclusion
Definition

Conclusão clínica (interpretação) dos resultados dos testes

ShortConclusão clínica (interpretação) dos resultados dos testes
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Need to be able to provide a conclusion that is not lost among the basic result data.

Alternate NamesReport
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. DiagnosticReport.conclusionCode
Definition

Códigos para a conclusão clínica dos resultados dos testes

ShortCódigos para a conclusão clínica dos resultados dos testes
Control0..*
BindingFor example codes, see SNOMEDCTClinicalFindings
(example to http://hl7.org/fhir/ValueSet/clinical-findings)

Diagnosis codes provided as adjuncts to the report.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. DiagnosticReport.presentedForm
Definition

Relatório completo conforme emitido

ShortRelatório completo conforme emitido
Comments

"application/pdf" is recommended as the most reliable and interoperable in this context.

Control0..*
TypeAttachment
Is Modifierfalse
Summaryfalse
Requirements

Gives laboratory the ability to provide its own fully formatted report for clinical fidelity.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))